Dimensionally stable and durable wood by lignin impregnation.

Cracking, warping, and decaying stemming from wood's poor dimensional stability and durability are the most annoying issues of natural wood. There is an urgent need to address these issues, of which, sustainable and green chemical treatments are favorably welcomed. Herein, we developed a facile method through the incorporation of environmentally friendly biopolymer lignin into wood cells for wood dimensional stability and durability enhancement. Enzymatic hydrolysis lignin (EHL) was dissolved into various solvents followed by impregnation and drying to incorporate lignin into wood cells. Impregnation treatment was developed to incorporate into wood to improve its dimensional stability, durability, and micromechanics. The anti-swelling efficiency reached up to 99.4 %, the moisture absorption decreased down to 0.55 %, the mass loss after brown rot decay decreased to 7.22 %, and the cell wall elasticity as well as hardness increased 8.7 % and 10.3 %, respectively. Analyses acquired from scanning electron microscopy, fluorescent microscopy, and Raman imaging revealed that the EHL was successfully colonized in cell lumen as well as in cell walls, thus improved wood dimensional stability and durability. Moreover, Fourier transform infrared spectroscopy and X-ray photoelectron spectroscopy confirmed EHL interaction with the cell wall components, thus the wood mechanical property was not impaired significantly, whereas nanoindentation data indicated even slight mechanical enhancement on the cell walls. This facile approach can improve the wood properties in multiple aspects and remarkably enhance the outdoor performance of modified wood products. In addition, using lignin as a natural modifying agent to improve wood performance will have a great positive impact on the environment.

Development of Lignin-Containing Cellulose Nanofibrils Coated Paper-Based Filters for Effective Oil-Water Separation.

New methods of oil-water separation are needed as industrialization has increased the prevalence of oil-water mixtures on Earth. As an abundant and renewable resource with high oxygen and grease barrier properties, mechanically refined cellulose nanofibrils (CNFs) may have promising applications for oil-water separations. The unbleached form of these nanofibrils, lignin-containing CNFs (LCNFs), have also been found to display extraordinary barrier properties and are more environmentally friendly and cost-effective than CNFs. Herein, both wet and dry LCNF-modified filter papers have been developed by coating commercial filter paper with an LCNF suspension utilizing vacuum filtration. The LCNF-modified filters were tested for effectiveness in separating oil-water emulsions, and a positive relationship was discovered between a filter's LCNF coat weight and its oil collection capabilities. The filtration time was also analyzed for various coat weights, revealing a trend of high flux for low LCNF coat weights giving-way-to predictions of a coat weight upper limit. Additionally, it was found that wet filters tend to have higher flux values and oil separation efficiency values than dry filters of the same LCNF coat weight. Results confirm that the addition of LCNF to commercial filter papers has the potential to be used in oil-water separation.

Highly Efficient Iron Oxide Nanoparticles Immobilized on Cellulose Nanofibril Aerogels for Arsenic Removal from Water.

The application and optimal operation of nanoparticle adsorbents in fixed-bed columns or industrial-scale water treatment applications are limited. This limitation is generally due to the tendency of nanoparticles to aggregate, the use of non-sustainable and inefficient polymeric resins as supporting materials in fixed-bed columns, or low adsorption capacity. In this study, magnesium-doped amorphous iron oxide nanoparticles (IONPs) were synthesized and immobilized on the surface of cellulose nanofibrils (CNFs) within a lightweight porous aerogel for arsenic removal from water. The IONPs had a specific surface area of 165 m2 g-1. The IONP-containing CNF aerogels were stable in water and under constant agitation due to the induced crosslinking using an epichlorohydrin crosslinker. The adsorption kinetics showed that both As(III) and As(V) adsorption followed a pseudo second-order kinetic model, and the equilibrium adsorption isotherm was best fitted using the Langmuir model. The maximum adsorption capacities of CNF-IONP aerogel for As(III) and As(V) were 48 and 91 mg As g-IONP-1, respectively. The optimum IONP concentration in the aerogel was 12.5 wt.%, which resulted in a maximum arsenic removal, minimal mass loss, and negligible leaching of iron into water.

Characterization and properties of hybrid foams from nanocellulose and kaolin-microfibrillated cellulose composite.

Hybrid nanocellulose-based foams are a desirable class of low-density and porous materials for their potential in many applications. This study aims at characterizing and understanding the structure-properties relationship of four foam formulations prepared from combinations of cellulose nanofibrils (CNF), cellulose nanocrystals (CNC), and kaolin-microfibrillated cellulose composite. All the foams were crosslinked with a polyamide-epichlorohydrin crosslinker (Polycup) to impart stability under wet conditions without additional functionalization. Foams containing 25 wt% kaolin exhibited excellent shape recovery promoted by a higher load of crosslinker (5 wt%), and superior compressive properties. The addition of CNC at 33.3 wt% and 50 wt% did not seem to enhance the properties of the foam and also reduced the specific surface area. A preliminary comparative study between the four tested formulations was conducted to assess the feasibility of the foam as an adsorbent of methylene blue dye.

Cellulose and lignocellulose nanofibril suspensions and films: A comparison.

A comparative study on the morphology and physico-mechanical properties of cellulose nanofibrils (CNF) and lignocellulose nanofibrils (LCNF) produced using a pilot-scale ultra-refining facility in the form of slurries and films was conducted. Suspensions and films of CNF and LCNF at different fines contents from 50% to 100% were prepared from bleached kraft pulp and old corrugated container (OCC) feedstock, respectively. We showed that the effect of film density on mechanical properties of CNF and LCNF films can outweigh the effect of fines content (or degree of fibrillation) and consequently an equally strong and stiff film can be produced from lower grades of CNF or LCNF at higher densities. After density normalization, particle size was found to be the main determining factor. Finally we conclude that a CNF or LCNF suspension with 70 % fines will yield films as strong and stiff as the materials with 100 % fines providing an opportunity for cost reduction.

Laminated Wallboard Panels Made with Cellulose Nanofibrils as a Binder: Production and Properties.

This study explored the development and characterization of laminated wallboard panels using renewable materials for building applications. The panels are based on cellulose nanofibrils (CNFs) as a binder and wood particles. Other additives included FiberLeanTM (microfibrillated cellulose/calcium carbonate composite), starch and fire retardant (boric acid/borax). These panels are also intended to address the environmental concerns of commercial gypsum boards. The manufacturing of the panels is via a wet-based process; hence no initial drying was required to remove the water from the CNF. It was found that the dosage of CNF (and/or FiberLeanTM) binder and the addition of starch had the largest impact upon the quality of the final product. The addition of starch was found more favorable in the presence of FiberLeanTM. The fire retardancy was induced by adding boric acid/borax (1:1). The burning test revealed that the panels treated with the fire retardant exhibited excellent burning properties comparable to that of gypsum board (inherently fire resistant). Interestingly, the addition of the boric acid/borax also appeared to increase the retention of starch in the system, leading to favorable mechanical properties.